Mobility scooter wheelchair carrier ramp
Are you looking for a solution to get your mobility equipment into your car?
Are you tired of carrying your wheelchair, mobility scooter or equipment up a difficult ramp?
Are you wondering what the best mobility scooter/ wheelchair carrier ramp is for you?
Our mobility scooter wheelchair carrier ramp is the perfect solution for you!
To ease of use, by providing the most extended two sectional ramps. This is particularly important when loading and unloading your scooter or wheelchair as it allows for a more gentle incline than other products on the market, making it safer. We use three welded support bars on the undercarriage of our ramp and central platform and higher gauge steel overall for extra strength and rigidity, which is why our carrier is 10 kgs more than cheaper copies.
There are three main things to consider when buying a carrier.
- Will my scooter/wheelchair fit on the carrier?
- Will my vehicle be able to carry the combined weight of the scooter/wheelchair and wheelchair carrier ( 40kgs)? To ascertain this, you will need to know the low load rating for your vehicle.
- Will my vehicle meet each state's rear overhang limits? Please check with the state's relevant authority.
If you are still unsure, we are here to help. Please contact us or come into our showroom for a demonstration or watch the link below.
It is introducing a fantastic solution for carrying power wheelchairs, mobility scooters, ATVs or just about anything else that will fit inside the parameters of the carrier.
A great alternative to updating your vehicle to enable you to carry your mobility device or ATV.
All you need is a vehicle fitted with a 2"x 2" (50mm x 50mm) Hayman Reece type pull-out tow bar that has a low load rating equivalent to the weight of your mobile device and the weight of the carrier (37kgs) combined.
Use the many tie-down points to secure your mobility device to the carrier. (Tie-down straps not included)
Note: Some pictures are of a model that loads/unloads on the right-hand side; the actual carrier's ramp folds down on the opposite side to allow curbside loading.
The carrier features an integrated 2 section ramp that folds up and out into three different positions.
The first position keeps the ramp folded upright against the back of the vehicle when not in use. It is secured in place by a spring pin.
The second position allows the ramp to stand at 90 degrees to the central carrying platform after loading the mobility scooter or wheelchair onto the main forum. The ramp is held vertically with a spring pin and a padlock for security.
The third position is the ramp unfolded. This position allows for scooters, power wheelchairs, and just about anything with wheels to be pushed or powered up the ramp.
A welded handle on the ramp allows for easy folding and unfolding.
Tie-down hooks onto any of the ten tie-down holes found on the 4" sides of the carrier.
The rear of the carrier has two reflectors for greater visibility at night.
Supporting the carrier is a heavy-duty 2'" x 2" (50 x50 mm) hitch tube and an anti-tilt bracket which features four bolts and a safety pin to allow the hitch tube to be removed from the carrier.
The hitch tube has a 5/8" hitch pin hole for securing the carrier to your vehicle.
Pick-up is available.